The Guolian model slitter is suitable for narrow-width paper slitting. It has automatic meter counting, counting, set length, quantity automatic shutdown, unwinding by photoelectric automatic correction control and other functions. The whole machin……
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time. Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross……
1. Prepare before starting up 1) Check each electrical switch for any abnormalities such as falling off or damage. 2) Wear the traction belt at the normal temperature stop condition according to the requirements of the process piece. 3) Start the e……
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length……
1. Applicable substrate: mica tape, paper, insulation material and film slitting 2, applicable industry: related industries with various insulating materials, special electrical paper, film 3. Applicable technology: sub-distribution, finished produ……
One: Introduction to tape slitting machine The slitting machine mainly divides the large-rolled master roll into products of different widths and can check the quality of the product. Its main features are as follows: 1. Unwinding photoelectric cor……
1. After the cutting is completed, the unloading is stopped; 2. Release the switch and lift the cutter unit. 3. Clean the crimping device and turn off the curling blower. 4. Turn off the photoelectric tracking system. 5. Turn off the power and air ……
1. The winding roller is pressed down, the counter is cleared, and the production is started; 2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the windin……
1. Razor slitting 1.1. The razor slitting requires the film to travel in the correct direction to the winding section. 1.2. Adjust the photoelectric tracking to bring the film to the proper position. 1.3. Tension the film and attach the blade to th……
1. Confirm that the main power supply voltage is 380V. 2. Turn on each power switch and check if the electricity and gas supply are normal. 3. Before starting the machine, you must confirm that the surface of each guide roller is smooth and free of……
Slitting machine is a kind of mechanical equipment for slitting wide sheets of paper or film into a plurality of narrow-width materials, which are commonly used in papermaking machinery and printing and packaging machinery.The traditional control s……
Daily maintenance and maintenance of the slitter: First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time. Second, the use of slitting machines is done by slitting machines and cross-cutting machines. ……
